NAS Iconbit I-STOR IS608

[sakatgg]

Система спасения NAS - FANTEC CL-35B2 и Iconbit I-STOR IS608

(CPU PLX NAS7821), взято здесь, автор der_metzger

1. Винт sata подсоединяем к компу с Linux

2. Качаем fantec_CL-35B2_rescue.tar.gz и распаковываем. Заходим под root в папку NAS

3. Запускаем скрипт sh install.sh /dev/sdx , где sdx - винт для NAS. Внимание: sdx перезаписывается полностью!!!

Команда в терминале Linux

root@runtu:/home/runtu/1/NAS# sh install.sh /dev/sda
[3;J


32+0 записей получено
32+0 записей отправлено
33554432 байт (34 MB, 32 MiB) скопирован, 1,29859 s, 25,8 MB/s
Информация: Не забудьте обновить /etc/fstab.

Информация: Не забудьте обновить /etc/fstab.                              

Модель: ATA ST380815AS (scsi)                                             
Диск /dev/sda: 80,0GB
Размер сектора (логич./физич.): 512B/512B
Таблица разделов: gpt
Флаги диска: 

Номер  Начало  Конец   Размер  Файловая система  Имя      Флаги
 1     33,6MB  8422MB  8389MB                    primary

0+1 записей получено
0+1 записей отправлено
444 байта скопировано, 0,00775193 s, 57,3 kB/s
17+1 записей получено
17+1 записей отправлено
8808 байт (8,8 kB, 8,6 KiB) скопирован, 0,00891646 s, 988 kB/s
254+1 записей получено
254+1 записей отправлено
130372 байт (130 kB, 127 KiB) скопирован, 0,0369692 s, 3,5 MB/s
4218+1 записей получено
4218+1 записей отправлено
2159948 байт (2,2 MB, 2,1 MiB) скопирован, 0,0722225 s, 29,9 MB/s
17+1 записей получено
17+1 записей отправлено
8808 байт (8,8 kB, 8,6 KiB) скопирован, 0,0746092 s, 118 kB/s
254+1 записей получено
254+1 записей отправлено
130372 байт (130 kB, 127 KiB) скопирован, 0,0245399 s, 5,3 MB/s
4218+1 записей получено
4218+1 записей отправлено
2159948 байт (2,2 MB, 2,1 MiB) скопирован, 0,0230659 s, 93,6 MB/s
mke2fs 1.42.13 (17-May-2015)
Creating filesystem with 2048000 4k blocks and 512064 inodes
Filesystem UUID: ce8a992b-dc47-458a-9c8f-b94c7b1d6607
Superblock backups stored on blocks: 
	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632

Allocating group tables: done                            
Сохранение таблицы inod'ов: done                            
Creating journal (32768 blocks): готово
Writing superblocks and filesystem accounting information: готово

fertig! Boote deine NAS!
root@runtu:/home/runtu/1/NAS#

[свернуть]

Получиться разметка как на скрине

Первый 32Mb на диске - есть 1st stage bootloader, u-boot, u-boot environment, kernel + initrd.

4. Подключаем винт к NAS, в моем случае Iconbit I-STOR IS608 (клон).
Если смотреть с лицевой панели, то в правый (Slot1) подключать. В другом не стартует.

5. Подключаем к serial port через usb адаптер 3.3В !!! (использую от телефона Siemens MA-8730P, скрин).

6. Запускаем PuTTY скорость 115200 и включаем NAS.

Система стартует с винта сразу, в том числе и uboot, записанный на раздел винта.

Сеть не работает, как я понял, ядро скомпилировано без поддержки RTL8211D

Serial port

Stage-1 Bootloader Fri Jun 10 14:12:46 CST 2011
Attempting to set PLLA to 750MHz ...
  plla_ctrl0 : 0x0000000A
  plla_ctrl1 : 0x000F0000
  plla_ctrl2 : 0x001D01A0
  plla_ctrl3 : 0x00000017
PLLA Set

Setup memory, testing
Reading disk 00
  Sector : 0x0000009A
  Hdr len: 0x0001FD3C
  Hdr CRC: 0xC2AB7EEB
 OK
Initialising disks
SATA PHY not ready for device 1
Detecting SATA busses:
Bus 0: Found first device OK
  Device 0: Model: ST380815AS Firm: 3.AAC  Ser#: 6QZ0M5Y2
            Type: Hard Disk
            Capacity: 76318.0 MB = 74.5 GB (156299375 x 512)
  Device 1: not available
Failed to read valid environment from disk, using built-in default


U-Boot 1.1.4 (Jun 20 2013 - 18:14:59)

U-Boot code: 60E00000 -> 60E1FD3C  BSS: -> 60E54564
RAM Configuration:
        Bank #0: 60000000 128 MB
SRAM Configuration:
        64KB at 0x50000000
NAND:256 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Setting Linux mem= boot arg value

IDE read: device 0 block # 288, count 1 ... 1 blocks read: OK
Hit any key to stop autoboot:  0
Extinguish LED

IDE read: device 0 block # 1290, count 5700 ... 5700 blocks read: OK
## Booting image at 60500000 ...
   Image Name:   Linux-2.6.31.6_SMP_820
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2159884 Bytes =  2.1 MB
   Load Address: 60008000
   Entry Point:  60008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux................................................................................................................................... done, booting the kernel.
[    0.000000] Linux version 2.6.31.6_SMP_820 (root@ProDev) (gcc version 4.6.0 20110429 (prerelease) (GCC) ) #100 SMP Sun May 29 04:53:45 EDT 2011
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: Oxsemi NAS
[    0.000000] 1 memory region
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: root=/dev/sda1 console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x01,0xd2,0x12,0x54,0xfa rootwait mem=128M poweroutage=yes
[    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 125496KB available (3692K code, 291K data, 124K init, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:96
[    0.000000] OX820_RPS_init_irq: interrupts 64 to 96
[    0.010000] Console: colour dummy device 80x30
[    0.010000] console [ttyS0] enabled
[    0.020000] Calibrating delay loop... 299.00 BogoMIPS (lpj=1495040)
[    0.240000] Security Framework initialized
[    0.240000] Mount-cache hash table entries: 512
[    0.250000] CPU: Testing write buffer coherency: ok
[    0.250000] Calibrating local timer... 375.50MHz.
[    0.320000] CPU1: Booted secondary processor
[    0.420000] Calibrating delay loop... 299.82 BogoMIPS (lpj=1499136)
[    0.630000] Brought up 2 CPUs
[    0.640000] SMP: Total of 2 processors activated (598.83 BogoMIPS).
[    0.650000] NET: Registered protocol family 16
[    0.650000] Number of DMA channels = 4, version = 4
[    0.660000] Reserving a DMA channel for DirectRAID
[    0.660000] Allocating 389 SRAM generic DMA descriptors
[    0.680000] bio: create slab <bio-0> at 0
[    0.690000] SCSI subsystem initialized
[    0.690000] usbcore: registered new interface driver usbfs
[    0.700000] usbcore: registered new interface driver hub
[    0.700000] usbcore: registered new device driver usb
[    0.730000] NET: Registered protocol family 2
[    0.730000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.740000] Switched to NOHz mode on CPU #0
[    0.740000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.740000] Switched to NOHz mode on CPU #1
[    0.750000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.760000] TCP: Hash tables configured (established 4096 bind 4096)
[    0.760000] TCP reno registered
[    0.770000] NET: Registered protocol family 1
[    0.770000] Create fragment cache
[    0.780000] fuse init (API version 7.12)
[    0.780000] msgmni has been set to 245
[    0.790000] alg: No test for stdrng (krng)
[    0.790000] io scheduler noop registered
[    0.800000] io scheduler anticipatory registered
[    0.800000] io scheduler deadline registered
[    0.810000] io scheduler cfq registered (default)
[    0.830000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.840000] serial8250: ttyS0 at MMIO 0x44200000 (irq = 55) is a 16550A
[    0.850000] brd: module loaded
[    0.860000] loop: module loaded
[    0.860000] ox820sata: OX820 sata core.
[    0.870000] scsi0 : oxnassata
[    0.870000] scsi1 : oxnassata
[    0.880000] ata1: SATA max UDMA/133 irq 50
[    0.880000] ata2: SATA max UDMA/133 irq 50
[    0.880000] ox820sata: reseting SATA core
[    1.410000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.460000] ata1.00: HPA detected: current 156299375, native 156301488
[    1.460000] ata1.00: ATA-7: ST380815AS, 3.AAC, max UDMA/133
[    1.470000] ata1.00: 156299375 sectors, multi 0: LBA48 NCQ (depth 0/32)
[    1.510000] ata1.00: configured for UDMA/133
[    1.520000] ox820sata: reseting SATA core
[    2.230000] ata2: SATA link down (SStatus 0 SControl 300)
[    2.230000] scsi 0:0:0:0: Direct-Access     ATA      ST380815AS       3.AA PQ: 0 ANSI: 5
[    2.240000] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.250000] sd 0:0:0:0: [sda] Write Protect is off
[    2.250000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.260000] tun: Universal TUN/TAP device driver, 1.6
[    2.260000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.260000] NAND: Page read time 40ms
[    2.260000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix NAND 256MiB 3,3V 8-bit)
[    2.260000] Scanning device for bad blocks
[    2.280000] Bad eraseblock 324 at 0x000002880000
[    2.280000] Bad eraseblock 325 at 0x0000028a0000
[    2.390000] Creating 2 MTD partitions on "NAND 256MiB 3,3V 8-bit":
[    2.400000] 0x000000000000-0x000000e00000 : "boot"
[    2.410000]  sda:
[    2.410000] 0x000000e00000-0x000010000000 : "rootfs"
[    2.420000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.420000] oxnas-ehci oxnas-ehci.0: OXNAS EHCI Host Controller
[    2.430000] oxnas-ehci oxnas-ehci.0: new USB bus registered, assigned bus number 1
[    2.470000] oxnas-ehci oxnas-ehci.0: irq 39, io mem 0x00000000
[    2.470000]  sda1
[    2.480000] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.490000] oxnas-ehci oxnas-ehci.0: USB 0.0 started, EHCI 1.00
[    2.490000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.500000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.500000] usb usb1: Product: OXNAS EHCI Host Controller
[    2.510000] usb usb1: Manufacturer: Linux 2.6.31.6_SMP_820 ehci_hcd
[    2.520000] usb usb1: SerialNumber: usb
[    2.520000] usb usb1: configuration #1 chosen from 1 choice
[    2.530000] hub 1-0:1.0: USB hub found
[    2.530000] hub 1-0:1.0: 2 ports detected
[    2.540000] Initializing USB Mass Storage driver...
[    2.540000] usbcore: registered new interface driver usb-storage
[    2.550000] USB Mass Storage support registered.
[    2.550000] mice: PS/2 mouse device common for all mice
[    2.560000] TCP cubic registered
[    2.560000] NET: Registered protocol family 10
[    2.570000] NET: Registered protocol family 17
[    2.570000] RPC: Registered udp transport module.
[    2.580000] RPC: Registered tcp transport module.
[    2.660000] kjournald starting.  Commit interval 5 seconds
[    2.660000] EXT3 FS on sda1, internal journal
[    2.660000] EXT3-fs: recovery complete.
[    2.660000] EXT3-fs: mounted filesystem with writeback data mode.
[    2.660000] VFS: Mounted root (ext3 filesystem) on device 8:1.
[    2.660000] Freeing init memory: 124K
modprobe: FATAL: Could not load /lib/modules/2.6.31.6_SMP_820/modules.dep: No such file or directory

                Welcome to Fedora
                Press 'I' to enter interactive startup.
Starting udev: modprobe: FATAL: Could not load /lib/modules/2.6.31.6_SMP_820/modules.dep: No such file or directory

[  OK  ]
Setting hostname localhost:  [  OK  ]
Checking filesystems
WARNING: couldn't open /etc/fstab: No such file or directory
Checking all file systems.
[  OK  ]
warning: can't open /etc/fstab: No such file or directory
mount: can't find / in /etc/fstab or /etc/mtab
Mounting local filesystems:  warning: can't open /etc/fstab: No such file or directory
[  OK  ]
Enabling /etc/fstab swaps:  swapon: /etc/fstab: open failed: No such file or directory
      [FAILED]
modprobe: FATAL: Could not load /lib/modules/2.6.31.6_SMP_820/modules.dep: No such file or directory

modprobe: FATAL: Could not load /lib/modules/2.6.31.6_SMP_820/modules.dep: No such file or directory

Entering non-interactive startup
Starting system logger: [  OK  ]
Starting system message bus: [  OK  ]
/etc/rc3.d/S24avahi-daemon: line 25: /etc/sysconfig/network: No such file or directory
Retrigger failed udev events[  OK  ]
Starting sshd: [  OK  ]

Fedora release 12 (Constantine)
Kernel 2.6.31.6_SMP_820 on an armv6l (/dev/ttyS0)

localhost login: root
Password:
Last login: Wed Dec 31 19:00:27 on ttyS0
root@localhost:~#

[свернуть]