Форум обсуждения систем  

Вернуться   Форум обсуждения систем "Умный дом", проектов Ардуино, OpenWRT и других DIY устройств > Форум умного дома > Сделай сам > OpenWRT/LEDE

Ответ
 
Опции темы Поиск в этой теме Опции просмотра
Старый 06.12.2018, 18:35   #411
melsem
Moderator
 
Регистрация: 19.10.2013
Сообщений: 479
Вес репутации: 599
melsem has much to be proud ofmelsem has much to be proud ofmelsem has much to be proud ofmelsem has much to be proud ofmelsem has much to be proud ofmelsem has much to be proud ofmelsem has much to be proud ofmelsem has much to be proud of
По умолчанию

Цитата:
Сообщение от am7528 Посмотреть сообщение
comgt он потребовал установить вначале chat пакет и так далее
Это зависимости, без них пакет не встанет и не будет работать.
Все что будут требовать, надо устанавливать.

Проверять уже в самом конце, после установки всех пакетов и зависимостей, и настройки конфига fstab, через винсцп, когда флешка в роутере..

Последний раз редактировалось melsem; 06.12.2018 в 18:38.
melsem вне форума   Ответить с цитированием
Старый 06.12.2018, 19:45   #412
am7528
Junior Member
 
Регистрация: 27.11.2018
Сообщений: 15
Вес репутации: 0
am7528 is an unknown quantity at this point
По умолчанию

по размеру не лезут не хватает пакетам 750кб. уже несколько дней пробовал не получается, все подключить.
am7528 вне форума   Ответить с цитированием
Старый 06.12.2018, 19:49   #413
am7528
Junior Member
 
Регистрация: 27.11.2018
Сообщений: 15
Вес репутации: 0
am7528 is an unknown quantity at this point
По умолчанию

если только снести luci
am7528 вне форума   Ответить с цитированием
Старый 07.12.2018, 14:38   #414
paulerr
Senior Member
 
Регистрация: 04.01.2013
Адрес: Москва
Сообщений: 461
Вес репутации: 1152
paulerr has a reputation beyond reputepaulerr has a reputation beyond reputepaulerr has a reputation beyond reputepaulerr has a reputation beyond reputepaulerr has a reputation beyond reputepaulerr has a reputation beyond reputepaulerr has a reputation beyond reputepaulerr has a reputation beyond reputepaulerr has a reputation beyond reputepaulerr has a reputation beyond reputepaulerr has a reputation beyond repute
По умолчанию

таки где USB у nanostation2???
Atheros AP2315 не имеет встроенного USB.
paulerr вне форума   Ответить с цитированием
Старый 07.12.2018, 15:19   #415
am7528
Junior Member
 
Регистрация: 27.11.2018
Сообщений: 15
Вес репутации: 0
am7528 is an unknown quantity at this point
По умолчанию

root@OpenWrt:~# dmesg
[ 0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Mar 23 17:43:48 UTC 2013
[ 0.000000] gpiochip_add: registered GPIOs 0 to 21 on device: ar2315-gpio
[ 0.000000] ar2315-gpio: registered 22 GPIOs
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019064 (MIPS 4KEc)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 01000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00001000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00001000
[ 0.000000] On node 0 totalpages: 4096
[ 0.000000] free_area_init_node: node 0, pgdat 802d4700, node_mem_map 80330000
[ 0.000000] Normal zone: 32 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 4064 pages, LIFO batch:0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064
[ 0.000000] Kernel command line: console=ttyS0,9600 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 64 (order: -4, 256 bytes)
[ 0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes
[ 0.000000] Memory: 12920k/16384k available (2285k kernel code, 3464k reserved, 353k data, 168k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 183.70 BogoMIPS (lpj=918528)
[ 0.110000] pid_max: default: 32768 minimum: 301
[ 0.120000] Mount-cache hash table entries: 512
[ 0.130000] NET: Registered protocol family 16
[ 0.850000] bio: create slab <bio-0> at 0
[ 0.870000] PCI host bridge to bus 0000:00
[ 0.880000] pci_bus 0000:00: root bus resource [mem 0x80800000-0x857f7fff]
[ 0.890000] pci_bus 0000:00: root bus resource [io 0x817f8000-0x817ffffe]
[ 0.900000] pci 0000:00:00.0: [168c:ff18] type 0 class 0x000200
[ 0.900000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0001ffff]
[ 0.900000] pci 0000:00:00.0: reg 14: [mem 0x00000000-0x03ffffff]
[ 0.900000] pci 0000:00:00.0: reg 18: [mem 0x00000000-0x003fffff]
[ 0.900000] pci 0000:00:03.0: [168c:ff18] type 0 class 0x000200
[ 0.900000] pci 0000:00:03.0: reg 10: [mem 0x00000000-0x0001ffff]
[ 0.900000] pci 0000:00:03.0: reg 14: [mem 0x00000000-0x03ffffff]
[ 0.900000] pci 0000:00:03.0: reg 18: [mem 0x00000000-0x003fffff]
[ 0.900000] pci 0000:00:00.0: BAR 1: can't assign mem (size 0x4000000)
[ 0.910000] pci 0000:00:03.0: BAR 1: can't assign mem (size 0x4000000)
[ 0.920000] pci 0000:00:00.0: BAR 2: assigned [mem 0x80800000-0x80bfffff]
[ 0.930000] pci 0000:00:03.0: BAR 2: assigned [mem 0x80c00000-0x80ffffff]
[ 0.940000] pci 0000:00:00.0: BAR 0: assigned [mem 0x81000000-0x8101ffff]
[ 0.950000] pci 0000:00:03.0: BAR 0: assigned [mem 0x81020000-0x8103ffff]
[ 0.960000] Switching to clocksource MIPS
[ 0.990000] NET: Registered protocol family 2
[ 1.040000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 1.130000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 1.210000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 1.290000] TCP: Hash tables configured (established 512 bind 512)
[ 1.360000] TCP reno registered
[ 1.400000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 1.470000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 1.550000] NET: Registered protocol family 1
[ 1.600000] PCI: CLS 0 bytes, default 16
[ 1.600000] Radio config found at offset 0xf8(0x1f8)
[ 1.690000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.760000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 1.870000] msgmni has been set to 25
[ 1.920000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 2.010000] io scheduler noop registered
[ 2.060000] io scheduler deadline registered (default)
[ 2.120000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 2.220000] serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a 16550A
[ 2.340000] gpiodev: gpio device registered with major 253
[ 2.420000] Searching for RedBoot partition table in spiflash at offset 0x3d0000
[ 2.560000] Searching for RedBoot partition table in spiflash at offset 0x3e0000
[ 2.690000] 7 RedBoot partitions found on MTD device spiflash
[ 2.760000] Creating 7 MTD partitions on "spiflash":
[ 2.820000] 0x000000000000-0x000000030000 : "RedBoot"
[ 2.890000] 0x000000030000-0x000000120000 : "kernel"
[ 2.960000] 0x000000120000-0x0000003c0000 : "rootfs"
[ 3.030000] mtd: partition "rootfs" set to be root filesystem
[ 3.100000] mtd: partition "rootfs_data" created automatically, ofs=2D0000, len=F0000
[ 3.200000] 0x0000002d0000-0x0000003c0000 : "rootfs_data"
[ 3.270000] 0x0000003c0000-0x0000003e0000 : "cfg"
[ 3.340000] 0x0000003e0000-0x0000003ef000 : "FIS directory"
[ 3.420000] 0x0000003ef000-0x0000003f0000 : "RedBoot config"
[ 3.500000] 0x0000003f0000-0x000000400000 : "boardconfig"
[ 3.650000] eth0: Atheros AR231x: 00:15:6d:f1:96:db, irq 4
[ 3.900000] ar231x_eth_mii: probed
[ 3.950000] eth0: attached PHY driver [Generic PHY] (mii_bushy_addr=0:00)
[ 4.040000] Registered led device: gpio1
[ 4.040000] Registered led device: gpio2
[ 4.040000] Registered led device: gpio3
[ 4.040000] Registered led device: gpio4
[ 4.040000] Registered led device: wlan
[ 4.050000] TCP cubic registered
[ 4.090000] NET: Registered protocol family 17
[ 4.140000] Bridge firewalling registered
[ 4.190000] 8021q: 802.1Q VLAN Support v1.8
[ 4.260000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 4.350000] Freeing unused kernel memory: 168k freed
[ 12.790000] JFFS2 notice: (462) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 8 of xref (0 dead, 2 orphan) found.
[ 17.550000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 17.640000] Backport based on wireless-testing.git master-2012-09-07
[ 17.710000] compat.git: wireless-testing.git
[ 17.850000] cfg80211: Calling CRDA to update world regulatory domain
[ 17.930000] cfg80211: World regulatory domain updated:
[ 17.990000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.090000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.180000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.270000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.370000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.460000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.030000] SCSI subsystem initialized
[ 19.410000] usbcore: registered new interface driver usbfs
[ 19.480000] usbcore: registered new interface driver hub
[ 19.550000] usbcore: registered new device driver usb
[ 20.590000] ath: EEPROM regdomain: 0x0
[ 20.590000] ath: EEPROM indicates default country code should be used
[ 20.590000] ath: doing EEPROM country->regdmn map search
[ 20.590000] ath: country maps to regdmn code: 0x3a
[ 20.590000] ath: Country alpha2 being used: US
[ 20.590000] ath: Regpair used: 0x3a
[ 20.590000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 20.600000] ath5k: phy0: Atheros AR2315 chip found (MAC: 0x86, PHY: 0x48)
[ 20.690000] cfg80211: Calling CRDA for country: US
[ 20.740000] cfg80211: Regulatory domain changed to country: US
[ 20.810000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.910000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 21.010000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 21.100000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.190000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.290000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.380000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 21.940000] PPP generic driver version 2.4.2
[ 22.450000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.000000] NET: Registered protocol family 24
[ 23.230000] nf_conntrack version 0.5.0 (204 buckets, 816 max)
[ 24.130000] uhci_hcd: USB Universal Host Controller Interface driver
[ 35.860000] device eth0 entered promiscuous mode
[ 36.020000] br-lan: port 1(eth0) entered forwarding state
[ 36.080000] br-lan: port 1(eth0) entered forwarding state
[ 38.080000] br-lan: port 1(eth0) entered forwarding state
[ 797.610000] Initializing USB Mass Storage driver...
[ 797.670000] usbcore: registered new interface driver usb-storage
[ 797.750000] USB Mass Storage support registered.
[ 879.210000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 879.290000] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 3428.080000] ext4: Unknown symbol crc16 (err 0)
[ 3809.710000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 4988.200000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
root@OpenWrt:~#

я про это писал на наносе нет встроеного усб пытаюсь через комп или вариант nfs?
am7528 вне форума   Ответить с цитированием
Старый 07.12.2018, 15:20   #416
am7528
Junior Member
 
Регистрация: 27.11.2018
Сообщений: 15
Вес репутации: 0
am7528 is an unknown quantity at this point
По умолчанию

root@OpenWrt:~# opkg list-installed
base-files - 117-r36088
block-mount - 0.2.0-9
busybox - 1.19.4-6
chat - 2.4.5-8
comgt - 0.32-21
dnsmasq - 2.62-2
dropbear - 2011.54-2
firewall - 2-55.1
gpioctl - 1.0-1
hotplug2 - 1.0-beta-4
iptables - 1.4.10-4
iw - 3.6-1
kmod-ath5k - 3.3.8+2012-09-07-3
kmod-crypto-aes - 3.3.8-1
kmod-crypto-core - 3.3.8-1
kmod-fs-ext4 - 3.3.8-1
kmod-ipt-conntrack - 3.3.8-1
kmod-lib-crc-ccitt - 3.3.8-1
kmod-lib-crc16 - 3.3.8-1
kmod-mac80211 - 3.3.8+2012-09-07-3
kmod-nls-cp1251 - 3.3.8-1
kmod-nls-utf8 - 3.3.8-1
kmod-pppoe - 3.3.8-1
kmod-pppox - 3.3.8-1
kmod-usb-core - 3.3.8-1
kmod-usb-ohci - 3.3.8-1
kmod-usb-storage - 3.3.8-1
kmod-usb-test - 3.3.8-1
kmod-usb2 - 3.3.8-1
libblkid - 2.21.2-1
libblobmsg-json - 2013-01-29-0bc317aa4d9af44806c28ca286d79a8b5a92b2b8
libc - 0.9.33.2-1
libgcc - 4.6-linaro-1
libip4tc - 1.4.10-4
libiwinfo - 36
libiwinfo-lua - 36
libjson - 0.9-2
liblua - 5.1.4-8
libubox - 2013-01-29-0bc317aa4d9af44806c28ca286d79a8b5a92b2b8
libubus-lua - 2013-01-13-bf566871bd6a633e4504c60c6fc55b2a97305a50
libuci - 2013-01-04.1-1
libuci-lua - 2013-01-04.1-1
libuuid - 2.21.2-1
lua - 5.1.4-8
luci-app-firewall - 0.11.1-1
luci-lib-ipkg - 0.11.1-1
luci-lib-sys - 0.11.1-1
luci-lib-web - 0.11.1-1
luci-mod-admin-core - 0.11.1-1
luci-mod-admin-full - 0.11.1-1
luci-proto-ppp - 0.11.1-1
luci-sgi-cgi - 0.11.1-1
luci-theme-base - 0.11.1-1
luci-theme-openwrt - 0.11.1-1
mtd - 18.1
netifd - 2013-01-29.2-4bb99d4eb462776336928392010b372236ac3c93
opkg - 618-3
ppp - 2.4.5-8
swconfig - 10
ubus - 2013-01-13-bf566871bd6a633e4504c60c6fc55b2a97305a50
ubusd - 2013-01-13-bf566871bd6a633e4504c60c6fc55b2a97305a50
uci - 2013-01-04.1-1
wpad-mini - 20120910-1
Collected errors:
* parse_from_stream_nomalloc: Missing new line character at end of file!
root@OpenWrt:~#
am7528 вне форума   Ответить с цитированием
Старый 07.12.2018, 16:45   #417
am7528
Junior Member
 
Регистрация: 27.11.2018
Сообщений: 15
Вес репутации: 0
am7528 is an unknown quantity at this point
По умолчанию

root@OpenWrt:~# dmesg
[ 0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Mar 23 17:43:48 UTC 2013
[ 0.000000] gpiochip_add: registered GPIOs 0 to 21 on device: ar2315-gpio
[ 0.000000] ar2315-gpio: registered 22 GPIOs
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019064 (MIPS 4KEc)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 01000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00001000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00001000
[ 0.000000] On node 0 totalpages: 4096
[ 0.000000] free_area_init_node: node 0, pgdat 802d4700, node_mem_map 80330000
[ 0.000000] Normal zone: 32 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 4064 pages, LIFO batch:0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064
[ 0.000000] Kernel command line: console=ttyS0,9600 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 64 (order: -4, 256 bytes)
[ 0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes
[ 0.000000] Memory: 12920k/16384k available (2285k kernel code, 3464k reserved, 353k data, 168k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 183.70 BogoMIPS (lpj=918528)
[ 0.110000] pid_max: default: 32768 minimum: 301
[ 0.120000] Mount-cache hash table entries: 512
[ 0.130000] NET: Registered protocol family 16
[ 0.850000] bio: create slab <bio-0> at 0
[ 0.870000] PCI host bridge to bus 0000:00
[ 0.880000] pci_bus 0000:00: root bus resource [mem 0x80800000-0x857f7fff]
[ 0.890000] pci_bus 0000:00: root bus resource [io 0x817f8000-0x817ffffe]
[ 0.900000] pci 0000:00:00.0: [168c:ff18] type 0 class 0x000200
[ 0.900000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0001ffff]
[ 0.900000] pci 0000:00:00.0: reg 14: [mem 0x00000000-0x03ffffff]
[ 0.900000] pci 0000:00:00.0: reg 18: [mem 0x00000000-0x003fffff]
[ 0.900000] pci 0000:00:03.0: [168c:ff18] type 0 class 0x000200
[ 0.900000] pci 0000:00:03.0: reg 10: [mem 0x00000000-0x0001ffff]
[ 0.900000] pci 0000:00:03.0: reg 14: [mem 0x00000000-0x03ffffff]
[ 0.900000] pci 0000:00:03.0: reg 18: [mem 0x00000000-0x003fffff]
[ 0.900000] pci 0000:00:00.0: BAR 1: can't assign mem (size 0x4000000)
[ 0.910000] pci 0000:00:03.0: BAR 1: can't assign mem (size 0x4000000)
[ 0.920000] pci 0000:00:00.0: BAR 2: assigned [mem 0x80800000-0x80bfffff]
[ 0.930000] pci 0000:00:03.0: BAR 2: assigned [mem 0x80c00000-0x80ffffff]
[ 0.940000] pci 0000:00:00.0: BAR 0: assigned [mem 0x81000000-0x8101ffff]
[ 0.950000] pci 0000:00:03.0: BAR 0: assigned [mem 0x81020000-0x8103ffff]
[ 0.960000] Switching to clocksource MIPS
[ 0.990000] NET: Registered protocol family 2
[ 1.040000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 1.130000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 1.210000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 1.290000] TCP: Hash tables configured (established 512 bind 512)
[ 1.360000] TCP reno registered
[ 1.400000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 1.470000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 1.550000] NET: Registered protocol family 1
[ 1.600000] PCI: CLS 0 bytes, default 16
[ 1.600000] Radio config found at offset 0xf8(0x1f8)
[ 1.690000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.760000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 1.870000] msgmni has been set to 25
[ 1.920000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 2.010000] io scheduler noop registered
[ 2.060000] io scheduler deadline registered (default)
[ 2.120000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 2.220000] serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a 16550A
[ 2.340000] gpiodev: gpio device registered with major 253
[ 2.420000] Searching for RedBoot partition table in spiflash at offset 0x3d0000
[ 2.560000] Searching for RedBoot partition table in spiflash at offset 0x3e0000
[ 2.690000] 7 RedBoot partitions found on MTD device spiflash
[ 2.760000] Creating 7 MTD partitions on "spiflash":
[ 2.820000] 0x000000000000-0x000000030000 : "RedBoot"
[ 2.890000] 0x000000030000-0x000000120000 : "kernel"
[ 2.960000] 0x000000120000-0x0000003c0000 : "rootfs"
[ 3.030000] mtd: partition "rootfs" set to be root filesystem
[ 3.100000] mtd: partition "rootfs_data" created automatically, ofs=2D0000, len=F0000
[ 3.200000] 0x0000002d0000-0x0000003c0000 : "rootfs_data"
[ 3.270000] 0x0000003c0000-0x0000003e0000 : "cfg"
[ 3.340000] 0x0000003e0000-0x0000003ef000 : "FIS directory"
[ 3.420000] 0x0000003ef000-0x0000003f0000 : "RedBoot config"
[ 3.490000] 0x0000003f0000-0x000000400000 : "boardconfig"
[ 3.650000] eth0: Atheros AR231x: 00:15:6d:f1:96:db, irq 4
[ 3.900000] ar231x_eth_mii: probed
[ 3.940000] eth0: attached PHY driver [Generic PHY] (mii_bushy_addr=0:00)
[ 4.040000] Registered led device: gpio1
[ 4.040000] Registered led device: gpio2
[ 4.040000] Registered led device: gpio3
[ 4.040000] Registered led device: gpio4
[ 4.040000] Registered led device: wlan
[ 4.050000] TCP cubic registered
[ 4.090000] NET: Registered protocol family 17
[ 4.140000] Bridge firewalling registered
[ 4.190000] 8021q: 802.1Q VLAN Support v1.8
[ 4.260000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 4.350000] Freeing unused kernel memory: 168k freed
[ 12.800000] JFFS2 notice: (462) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 6 of xref (0 dead, 0 orphan) found.
[ 14.580000] SCSI subsystem initialized
[ 14.980000] usbcore: registered new interface driver usbfs
[ 15.050000] usbcore: registered new interface driver hub
[ 15.120000] usbcore: registered new device driver usb
[ 16.310000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 16.480000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 16.650000] uhci_hcd: USB Universal Host Controller Interface driver
[ 16.850000] Initializing USB Mass Storage driver...
[ 16.910000] usbcore: registered new interface driver usb-storage
[ 16.990000] USB Mass Storage support registered.
[ 42.140000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 42.230000] Backport based on wireless-testing.git master-2012-09-07
[ 42.310000] compat.git: wireless-testing.git
[ 42.460000] cfg80211: Calling CRDA to update world regulatory domain
[ 42.540000] cfg80211: World regulatory domain updated:
[ 42.600000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 42.700000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 42.790000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 42.880000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 42.980000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 43.070000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 44.850000] ath: EEPROM regdomain: 0x0
[ 44.850000] ath: EEPROM indicates default country code should be used
[ 44.850000] ath: doing EEPROM country->regdmn map search
[ 44.850000] ath: country maps to regdmn code: 0x3a
[ 44.850000] ath: Country alpha2 being used: US
[ 44.850000] ath: Regpair used: 0x3a
[ 44.850000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 44.860000] ath5k: phy0: Atheros AR2315 chip found (MAC: 0x86, PHY: 0x48)
[ 44.950000] cfg80211: Calling CRDA for country: US
[ 45.000000] cfg80211: Regulatory domain changed to country: US
[ 45.070000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 45.170000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 45.270000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 45.360000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 45.450000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 45.540000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 45.640000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 47.830000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 48.590000] PPP generic driver version 2.4.2
[ 49.190000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 49.770000] NET: Registered protocol family 24
[ 50.140000] nf_conntrack version 0.5.0 (204 buckets, 816 max)
[ 70.870000] device eth0 entered promiscuous mode
[ 71.030000] br-lan: port 1(eth0) entered forwarding state
[ 71.090000] br-lan: port 1(eth0) entered forwarding state
[ 73.090000] br-lan: port 1(eth0) entered forwarding state
root@OpenWrt:~#


это после перезагрузки
am7528 вне форума   Ответить с цитированием
Старый 08.12.2018, 13:01   #418
am7528
Junior Member
 
Регистрация: 27.11.2018
Сообщений: 15
Вес репутации: 0
am7528 is an unknown quantity at this point
По умолчанию

в диру /tmp пакеты могу ставить, с стороны роуетра она видна, но на этом всё при установке самого пакета ругается нет места. Может есть смысл режим монитора плюс airodump-ng. Или кому попадалась непосредственно статья к наносу по установке железа разъёма усб или подключить nfs.
am7528 вне форума   Ответить с цитированием
Старый 08.12.2018, 17:51   #419
stD
Senior Member
 
Аватар для stD
 
Регистрация: 02.04.2012
Адрес: Питер
Сообщений: 1,125
Вес репутации: 1310
stD has a brilliant futurestD has a brilliant futurestD has a brilliant futurestD has a brilliant futurestD has a brilliant futurestD has a brilliant futurestD has a brilliant futurestD has a brilliant futurestD has a brilliant futurestD has a brilliant futurestD has a brilliant future
По умолчанию

am7528 уберите "простыни" под спойлер (кнопочка с плюсиком).

Развернуть для просмотра

спойлер
[свернуть]
__________________
istarik.ru
stD вне форума   Ответить с цитированием
Старый 08.12.2018, 20:38   #420
am7528
Junior Member
 
Регистрация: 27.11.2018
Сообщений: 15
Вес репутации: 0
am7528 is an unknown quantity at this point
По умолчанию

уберите "простыни" под спойлер (кнопочка с плюсиком).
хм, что- то кнопки -плюсика не вижу.
am7528 вне форума   Ответить с цитированием
Ответ


Здесь присутствуют: 2 (пользователей: 0 , гостей: 2)
 
Опции темы Поиск в этой теме
Поиск в этой теме:

Расширенный поиск
Опции просмотра

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход


Текущее время: 21:25. Часовой пояс GMT +3.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd. Перевод: zCarot
Яндекс.Метрика