22.11.2012, 17:42 | #1 |
Administrator
Регистрация: 12.04.2010
Адрес: Москва
Сообщений: 9,616
Вес репутации: 9821 |
Список одноплатных компьютеров
Список одноплатных компьютеров:
Raspberry Pi Model B MK802 Mele A1000 Rhombus-Tech A10 EOMA-68 Gooseberry board A13-OLinuXino VIA APC VIA ARTiGO A1200 VIA ARTiGO A1150 BeagleBoard Rev. C4 BeagleBoard-xM BeagleBone PandaBoard PandaBoard ES Cotton Candy CuBox Hawkboard IGEP v2 IGEP COM Proton IGEP COM Module Gumstix Overo series Origen Board Nimbus Stratus SheevaPlug dev kit (Basic) GuruPlug Standard GuruPlug Display DreamPlug D2Plug Trim-Slice series Snowball i.MX53 Quick Start Board Pineriver H24/MiniX Smallart UHOST Genesi Efika MX Smarttop Embest DevKit8600 Embest SBC8018 Embest SBC8530 Embest DevKit8500D Odroid-X Odroid-X2 Odroid-U Odroid-U2 Samsung S3C2440 SOM2416 Micro2440 OK6410 LS6410 mini X |
25.11.2012, 16:51 | #2 |
Administrator
Регистрация: 12.04.2010
Адрес: Москва
Сообщений: 9,616
Вес репутации: 9821 |
Samsung S3C2440
CPU Samsung S3C2440A 400MHz, Max freq. 533Mhz SDRAM 64MB Flash 256MB Nand Flash 2MB Nor Flash, BIOS installed LCD 4 wire resistive touch screen interface Up to 4096 color STN, 3.5 inches to12.1 inches, up to 1024x768 pixels Up to 64K color TFT, 3.5 inches to 12.1 inches, up to1024x768 pixels Interface and Resource 1 x 10M Ethernet RJ-45(CS8900) 3 x Serial Ports(1 RS232 with CTS and RTS) 1 x USB Host 1 x USB Slave Type B 1 x SD Card Interface 1 x Stereo audio out, 1 Micro In 1 x 20-Pin JTAG 4 x USER LEDs 4 x USER buttons 1 x PWM Beeper 1 x POT can be used for A/D converter adjust 1 x AT24C08 for I2C test 1 x 20-Pin Camera Interface 1 x Battery for RTC 1 x Power In(12V), with switch and lamp Genuine Friendly 3.5 Touch Screen. Сделан на базе Samsung S3C2440 |
25.11.2012, 17:12 | #3 |
Administrator
Регистрация: 12.04.2010
Адрес: Москва
Сообщений: 9,616
Вес репутации: 9821 |
SOM2416
Processor(Core) Samsung S3C2416(ARM926EJ)-65nm Speed: CORE/SDRAM 400MHz(cpu)/266M(DDR2 SDRAM) I-Cache/ D-Cache, L2 16KB/16KB Internal SRAM 64KB for internal SRAM Buffer SDRAM 64MB, 16-Bit DDR2 Flash Availability 64MB~4GB of Nand Flash optional Connectivity UART]4-ch: Uart0/1: 4-wire(TX/RX/RTS/CTS);uart2/3: 2-wire(TX/RX) Slow IrDA/ Fast IrDA IrDA 1.0, multiplex with UARTs SPI, # of Chip Selects 1-CH high speed SPl, protocol version 2.11 I2C Bus 1-CH Multi-Master IIC-Bus USB Host Ports 1-CH of OHCI 1.0 USB Host,Compatible USB 1.1 USB Device Port 1-CH USB 2.0 Spec USB device, 9 Endpoints Ethernet Interface 10/100MB high performance Ethernet(LAN9220/LAN9221) SD/MMC Interface 2-CH,SDIO 1.0/HS-MMC 4.2/SD Host 2.0/SD Memory Card Protocol 2.1/CE-ATA PCMCIA/Compact Flash No Interactivity LCD I/F (Resolution,Depth) Typically 800x600,16bit/18bit Touch Panel Controller 4-wire,support Resistive Touch Panel 2D/3D Graphics 2D Graphics Accelerator Engine Video Performance(Res@fps) (To Be Determined) Audio I/F I2S of WM8731 codec, Line In/Line Out/Microphone I/F RTC CPU internal, external backup battery input Watchdog Yes,CPU Internal Extendability Expansion Bus Add/Data 7-Bit Address/8-Bit Data Local Bus GPIO]10+~30+ Channels Interrupt Source 12 Timer/PWM 3-CH 16bit ADC/DAC 2-CH ADC |
25.11.2012, 17:17 | #4 |
Administrator
Регистрация: 12.04.2010
Адрес: Москва
Сообщений: 9,616
Вес репутации: 9821 |
Micro2440
Specification: CPU: 400 MHz Samsung S3C2440A ARM920T (max freq. 533 MHz) RAM: 64 MB SDRAM, 32 bit Bus Flash: 256 MB NAND Flash and 2 MB NOR Flash with BIOS LCD Interface: STN Displays: Monochrome, 4 gray levels, 16 gray levels, 256 colors, 4096 colors Max: 1024x768 TFT Displays: Monochrome, 4 gray levels, 16 gray levels, 256 colors, 64k colors, true color Max: 1024x768, Touch Panel: 4 wire resistive User Outputs: 4x LEDs Expansion headers (2.0 mm) Debug: 10 pin JTAG (2.0 mm) Dimension: 63 x 52 mm OS Support Windows CE 5 and 6, Linux 2.6, Android |
25.11.2012, 17:26 | #5 |
Administrator
Регистрация: 12.04.2010
Адрес: Москва
Сообщений: 9,616
Вес репутации: 9821 |
CORE6410
LS6410CORE is an small size, low power, and high performance ARM11 core board. It can be used on car, home automation, industry PDA, industry digital control, consumer electronics, mobile terminal etc. Features: 1. 8 layer design. Two layers of blind via, and one layer of buried via. 2. Size 6X6cm, and thickness of 2.8mm. 3. Single power supply of range 3.7 - 6.5V. 4. ARM 11S3C6410 of800MHZ. 5. MobileDDR of 256M Byte, and system bus running at 266MHz. 6. 1GB of NANDFlash with support to up to 8GB. 7. iNAND Flash, with support upto 8GB (with spare PCB mounting area) 8. WM9713 Audio output, supports two line input and two line output; support TOUCH function, and can be with GSM to do voice communication 9. Integrated 100M Ethernet 10. 170 pins that provide access to all CPU's functions. Detail please refer to the definition of pins. |
25.11.2012, 17:34 | #6 |
Administrator
Регистрация: 12.04.2010
Адрес: Москва
Сообщений: 9,616
Вес репутации: 9821 |
OK6410-B board+4.3"LCD(256M RAM,4GB FLASH)
Specification OK6410-B ARM11 development board bundled with a 4.3" TFT LCD. Samsung S3C6410 MCU, 256MB DDR RAM, 4GB NAND Flash, WinCE / Linux / Android / uCos-II support, advanced Video / graphic support with 3D acceleration. Samsung S3C6410 microcontroller based on the ARM1176JZF-S core, main frequency @ 533/667MHz; 256MB Mobile DDRram; 4GB NAND Flash; 12MHz、48MHz、27MHz、32.768KH clock source; 5V power supply adaptable One reset button implemented with specific reset chip; 8-bit toggle switch for selecting boot mode; Four serial ports, including 1 5-wire RS232 and 3 3-wire TTL; One 100M Ethernet port with DM9000AE and indicators; One USB Host interface supporting USB1.1 protocol; One USB Slave (MINI-USB) interface supporting USB2.0 protocol; One high-speed SD card slot supporting SD Memory and SDIO; One WIFI expansion interface; Stereo audio I/O sockets; LCD and touch screen interface supporting 3.5”, 4.3”, 5.6”, 5.7”, 7” TFT LCD; One CVBS output interface (PAL/NTSC) One CMOS camera connector supporting ITU-R BT601/656 8-bit mode; Built-in RTC (Real Time Clock) with back-up battery; One JTAG interface using 2*10pin connector; One Infrared receiver; Four user LEDs; One Buzzer; 2 x SPI channel 2 x DA 8 x AD 7 x interrupt 38 x GPIO IIC interface Dimension: 81 x 105mm Working Temperature: -20 to 70℃ 4.3" LCD |
25.11.2012, 17:51 | #7 |
Administrator
Регистрация: 12.04.2010
Адрес: Москва
Сообщений: 9,616
Вес репутации: 9821 |
iMX233-OLinuXino-Micro
iMX233 ARM926J processor at 454Mhz 64 MB RAM SD-card connector for booting the Linux image TV PAL/NTSC video output 1 USB High Speed Host three Buttons 2x30 pin GPIO for connection of other hardware PCB dimensions: 3.00'' x 1.70'' (76.2mm x 43.2mm) Nominal dimensions: 3.40'' x 1.70'' (86.4mm x 43.2mm) |
25.11.2012, 17:58 | #8 |
Administrator
Регистрация: 12.04.2010
Адрес: Москва
Сообщений: 9,616
Вес репутации: 9821 |
Gooseberry board
Specs CPU : A10 1 Ghz overclockable to 1.5 Ghz (1.2 Ghz highest stable overclock on android) Graphics Processor : Mali 400 MHz Operating System : Android 4.0 ICS Onboard Storage: 4Gb (upgradeable by Micro SD memory card- 32gb) Wifi: 802.11 b/g/n Connectivity: Ac jack, 1x 3.5mm Earphone Jack, 1x Mini Usb, 1x Hdmi Out, Micro Sd slot Compatible software: Android ICS is the only fully compatible OS! Ubuntu a possibility with advanced technical knowledge |
25.11.2012, 18:18 | #9 |
Administrator
Регистрация: 12.04.2010
Адрес: Москва
Сообщений: 9,616
Вес репутации: 9821 |
Beaglebone
Board size: 3.4" x 2.1" Shipped with 4 GB microSD card with the Angstrom Distribution with node.js and Cloud9 IDE Single cable development environment with built-in FTDI-based serial/JTAG and on-board hub to give the same cable simultaneous access to a USB device port on the target processor Industry standard 3.3V I/Os on the expansion headers with easy-to-use 0.1" spacing On-chip Ethernet, not off of USB 256MB of DDR2 700-MHz super-scalar ARM Cortex™-A8 Easier to clone thanks to larger pitch on BGA devices (0.8mm vs. 0.4mm), no package-on-package memories, standard DDR2 vs. LPDDR, integrated USB PHYs and more. |
26.11.2012, 21:26 | #10 |
Administrator
Регистрация: 12.04.2010
Адрес: Москва
Сообщений: 9,616
Вес репутации: 9821 |
Hackberry
CPU 1.2GHz Allwinner A10 ARM Cortex A8 GPU Mali400 with hardware 3D acceleration and hardware video decoding Serial port 3.3v TTL 4-pin header Audio input 3.5mm microphone jack Audio output Audio over HDMI USB 2 x USB A 2.0 ports Internal storage 4GB NAND storage, 1.5GB available in user partition in Android External storage SDHC card slot supporting up to 32GB Networking 10/100 Ethernet, Realtek 802.11n WiFi Memory DDR3 512MB / 1GB, ~100MB is reserved for the GPU Boot Boot from SD card and internal storage via u-boot OS Android 4.0 ICS, Linux support Digital video output HDMI up to 1080p (cable not included) Analog video output 3.5mm composite AV, 3.5mm component Y/Pb/Pr (cables not included) Power NEMA 2-pin power adapter included Input AC100-240V-0.4A 50/60Hz Output DC5v |
Здесь присутствуют: 1 (пользователей: 0 , гостей: 1) | |
|
|