Настройки сети OpenWrt

[girk]

Log заводской есть, там попадается что то похожее: rt28xx_init

Развернуть для просмотра

------------- ARC-OS SYSTEM LOG -------------
Jan 1 00:04:54 ArcWeb user.warn kernel:
Jan 1 00:04:54 ArcWeb user.warn kernel: eth0 mii.o query= phy_id:1, address:0 retval:3100
Jan 1 00:04:54 ArcWeb user.warn kernel:
Jan 1 00:04:54 ArcWeb user.warn kernel: eth0 mii.o query= phy_id:1, address:5 retval:0
Jan 1 00:04:54 ArcWeb user.info kernel: eth0.2: dev_set_promiscuity(master, 1)
Jan 1 00:04:54 ArcWeb user.info kernel: device eth0.2 entered promiscuous mode
Jan 1 00:04:54 ArcWeb user.info kernel: br-lan: port 2(eth0.2) entering learning state
Jan 1 00:04:54 ArcWeb user.info kernel: br-lan: topology change detected, propagating
Jan 1 00:04:54 ArcWeb user.info kernel: br-lan: port 2(eth0.2) entering forwarding state
Jan 1 00:04:55 ArcWeb user.info kernel: device ra0 entered promiscuous mode
Jan 1 00:04:55 ArcWeb user.info kernel: br-lan: port 3(ra0) entering learning state
Jan 1 00:04:55 ArcWeb user.info kernel: br-lan: topology change detected, propagating
Jan 1 00:04:55 ArcWeb user.info kernel: br-lan: port 3(ra0) entering forwarding state
Jan 1 00:04:56 ArcWeb user.info kernel: br-lan: port 3(ra0) entering disabled state
Jan 1 00:04:56 ArcWeb user.info kernel: br-lan: port 2(eth0.2) entering disabled state
Jan 1 00:04:56 ArcWeb user.info kernel: br-lan: port 1(eth0.1) entering disabled state
Jan 1 00:04:56 ArcWeb user.info kernel: br-lan: port 3(ra0) entering learning state
Jan 1 00:04:56 ArcWeb user.info kernel: br-lan: port 2(eth0.2) entering learning state
Jan 1 00:04:56 ArcWeb user.info kernel: br-lan: port 1(eth0.1) entering learning state
Jan 1 00:04:56 ArcWeb user.info kernel: br-lan: topology change detected, propagating
Jan 1 00:04:56 ArcWeb user.info kernel: br-lan: port 3(ra0) entering forwarding state
Jan 1 00:04:56 ArcWeb user.info kernel: br-lan: topology change detected, propagating
Jan 1 00:04:56 ArcWeb user.info kernel: br-lan: port 2(eth0.2) entering forwarding state
Jan 1 00:04:56 ArcWeb user.info kernel: br-lan: topology change detected, propagating
Jan 1 00:04:56 ArcWeb user.info kernel: br-lan: port 1(eth0.1) entering forwarding state
Jan 1 00:05:00 ArcWeb user.warn kernel: (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
Jan 1 00:05:00 ArcWeb user.warn kernel: (Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
Jan 1 00:05:00 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7af8!
Jan 1 00:05:00 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7b24!
Jan 1 00:05:00 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7b50!
Jan 1 00:05:00 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7acc!
Jan 1 00:05:00 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7a48!
Jan 1 00:05:00 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7a74!
Jan 1 00:05:00 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a248c!
Jan 1 00:05:00 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13919ac!
Jan 1 00:05:00 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13919e0!
Jan 1 00:05:00 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a2524!
Jan 1 00:05:00 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a2434!
Jan 1 00:05:00 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a24f4!
Jan 1 00:05:00 ArcWeb user.warn kernel: -->RTUSBVenderReset
Jan 1 00:05:00 ArcWeb user.warn kernel: <--RTUSBVenderReset
Jan 1 00:05:01 ArcWeb user.warn kernel: Key1Str is Invalid key length(0) or Type(1)
Jan 1 00:05:01 ArcWeb user.warn kernel: Key2Str is Invalid key length(0) or Type(0)
Jan 1 00:05:01 ArcWeb user.warn kernel: Key3Str is Invalid key length(0) or Type(0)
Jan 1 00:05:01 ArcWeb user.warn kernel: Key4Str is Invalid key length(0) or Type(0)
Jan 1 00:05:01 ArcWeb user.warn kernel: 1. Phy Mode = 8
Jan 1 00:05:01 ArcWeb user.warn kernel: 2. Phy Mode = 8
Jan 1 00:05:01 ArcWeb user.warn kernel: (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
Jan 1 00:05:01 ArcWeb user.warn kernel: (Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
Jan 1 00:05:01 ArcWeb user.warn kernel: 3. Phy Mode = 8
Jan 1 00:05:01 ArcWeb user.warn kernel: RTMPSetPhyMode: channel is out of range, use first channel=36
Jan 1 00:05:01 ArcWeb user.warn kernel: MCS Set = ff ff 00 00 00
Jan 1 00:05:01 ArcWeb user.warn kernel: <==== rt28xx_init, Status=0
Jan 1 00:05:01 ArcWeb user.warn kernel: 0x1300 = 00064300
Jan 1 00:05:02 ArcWeb user.warn kernel: (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
Jan 1 00:05:02 ArcWeb user.warn kernel: (Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
Jan 1 00:05:03 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7af8!
Jan 1 00:05:03 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7b24!
Jan 1 00:05:03 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7b50!
Jan 1 00:05:03 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7acc!
Jan 1 00:05:03 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7a48!
Jan 1 00:05:03 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7a74!
Jan 1 00:05:03 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a248c!
Jan 1 00:05:03 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13919ac!
Jan 1 00:05:03 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13919e0!
Jan 1 00:05:03 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a2524!
Jan 1 00:05:03 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a2434!
Jan 1 00:05:03 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a24f4!
Jan 1 00:05:03 ArcWeb user.warn kernel: -->RTUSBVenderReset
Jan 1 00:05:03 ArcWeb user.warn kernel: <--RTUSBVenderReset
Jan 1 00:05:03 ArcWeb user.warn kernel: Key1Str is Invalid key length(0) or Type(1)
Jan 1 00:05:03 ArcWeb user.warn kernel: Key2Str is Invalid key length(0) or Type(0)
Jan 1 00:05:03 ArcWeb user.warn kernel: Key3Str is Invalid key length(0) or Type(0)
Jan 1 00:05:03 ArcWeb user.warn kernel: Key4Str is Invalid key length(0) or Type(0)
Jan 1 00:05:03 ArcWeb user.warn kernel: 1. Phy Mode = 8
Jan 1 00:05:03 ArcWeb user.warn kernel: 2. Phy Mode = 8
Jan 1 00:05:03 ArcWeb user.warn kernel: (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
Jan 1 00:05:03 ArcWeb user.warn kernel: (Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
Jan 1 00:05:03 ArcWeb user.warn kernel: 3. Phy Mode = 8
Jan 1 00:05:03 ArcWeb user.warn kernel: RTMPSetPhyMode: channel is out of range, use first channel=36
Jan 1 00:05:03 ArcWeb user.warn kernel: MCS Set = ff ff 00 00 00
Jan 1 00:05:03 ArcWeb user.warn kernel: <==== rt28xx_init, Status=0
Jan 1 00:05:03 ArcWeb user.warn kernel: 0x1300 = 00064300
Jan 1 00:05:07 ArcWeb user.notice upnp firewall: removing wan interface
Jan 1 00:05:07 ArcWeb user.info kernel: br-lan: port 3(ra0) entering disabled state
Jan 1 00:05:09 ArcWeb user.notice root: [Wireless] ra0 is enabled.
Jan 1 00:05:09 ArcWeb user.warn kernel: RX DESC a138a000 size = 2048
Jan 1 00:05:09 ArcWeb user.warn kernel: <-- RTMPAllocTxRxRingMemory, Status=0
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c11f7b78!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c11c6358!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c11c6330!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c11c6308!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c11ce90c!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c11cea10!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c11ce934!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c119cc2c!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c118e520!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c118f358!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c1190190!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c1190fc8!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c1191e00!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c1192c38!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c1193a70!
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c119c948!
Jan 1 00:05:09 ArcWeb user.warn kernel: default ApCliAPSDCapable[0]=1
Jan 1 00:05:09 ArcWeb user.warn kernel: 1. Phy Mode = 9
Jan 1 00:05:09 ArcWeb user.warn kernel: 2. Phy Mode = 9
Jan 1 00:05:09 ArcWeb user.warn kernel: 3. Phy Mode = 9
Jan 1 00:05:09 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c118e12c!
Jan 1 00:05:09 ArcWeb user.warn kernel: MCS Set = ff 00 00 00 00
Jan 1 00:05:09 ArcWeb user.warn kernel: SYNC - BBP R4 to 20MHz.l
Jan 1 00:05:12 ArcWeb user.warn kernel: Main bssid = a8:87:ed:33:6b:38
Jan 1 00:05:12 ArcWeb user.warn kernel: <==== rt28xx_init, Status=0
Jan 1 00:05:12 ArcWeb user.warn kernel: 0x1300 = 00064320
Jan 1 00:05:12 ArcWeb user.info kernel: br-lan: port 3(ra0) entering learning state
Jan 1 00:05:12 ArcWeb user.info kernel: br-lan: topology change detected, propagating
Jan 1 00:05:12 ArcWeb user.info kernel: br-lan: port 3(ra0) entering forwarding state
Jan 1 00:05:13 ArcWeb user.info kernel: device ra0 left promiscuous mode
Jan 1 00:05:13 ArcWeb user.info kernel: br-lan: port 3(ra0) entering disabled state
Jan 1 00:05:13 ArcWeb user.info kernel: device ra0 entered promiscuous mode
Jan 1 00:05:13 ArcWeb user.info kernel: br-lan: port 3(ra0) entering learning state
Jan 1 00:05:13 ArcWeb user.info kernel: br-lan: topology change detected, propagating
Jan 1 00:05:13 ArcWeb user.info kernel: br-lan: port 3(ra0) entering forwarding state
Jan 1 00:05:13 ArcWeb user.notice root: [Wireless] ra1 is enabled.
Jan 1 00:05:14 ArcWeb user.notice root: [Wireless] ra3 is disabled.
Jan 1 00:05:14 ArcWeb user.notice root: [Wireless] ra3 is disabled.
Jan 1 00:05:14 ArcWeb user.notice root: Loading rt3572sta module
Jan 1 00:05:15 ArcWeb user.warn kernel: (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
Jan 1 00:05:15 ArcWeb user.warn kernel: (Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
Jan 1 00:05:15 ArcWeb user.debug kernel: usb 1-1.3: ifconfig timed out on ep0out len=0/0
Jan 1 00:05:15 ArcWeb user.debug kernel: usb 1-1.3: ifconfig timed out on ep0out len=0/0
Jan 1 00:05:15 ArcWeb user.debug kernel: usb 1-1.3: ifconfig timed out on ep0out len=0/0
Jan 1 00:05:15 ArcWeb user.debug kernel: usb 1-1.3: ifconfig timed out on ep0out len=0/0
Jan 1 00:05:15 ArcWeb user.debug kernel: usb 1-1.3: ifconfig timed out on ep0out len=0/0
Jan 1 00:05:15 ArcWeb user.debug kernel: usb 1-1.3: ifconfig timed out on ep0out len=0/0
Jan 1 00:05:15 ArcWeb user.debug kernel: usb 1-1.3: ifconfig timed out on ep0out len=0/0
Jan 1 00:05:15 ArcWeb user.debug kernel: usb 1-1.3: ifconfig timed out on ep0out len=0/0
Jan 1 00:05:15 ArcWeb user.debug kernel: usb 1-1.3: ifconfig timed out on ep0out len=0/0
Jan 1 00:05:15 ArcWeb user.debug kernel: usb 1-1.3: ifconfig timed out on ep0out len=0/0
Jan 1 00:05:16 ArcWeb user.debug kernel: usb 1-1.3: ifconfig timed out on ep0out len=0/0
Jan 1 00:05:16 ArcWeb user.debug kernel: usb 1-1.3: ifconfig timed out on ep0out len=0/0
Jan 1 00:05:16 ArcWeb user.debug kernel: usb 1-1.3: ifconfig timed out on ep0out len=0/0
Jan 1 00:05:16 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7af8!
Jan 1 00:05:16 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7b24!
Jan 1 00:05:16 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7b50!
Jan 1 00:05:16 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7acc!
Jan 1 00:05:16 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7a48!
Jan 1 00:05:16 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7a74!
Jan 1 00:05:16 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a248c!
Jan 1 00:05:16 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13919ac!
Jan 1 00:05:16 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13919e0!
Jan 1 00:05:16 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a2524!
Jan 1 00:05:16 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a2434!
Jan 1 00:05:16 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a24f4!
Jan 1 00:05:16 ArcWeb user.warn kernel: -->RTUSBVenderReset
Jan 1 00:05:16 ArcWeb user.warn kernel: <--RTUSBVenderReset
Jan 1 00:05:16 ArcWeb user.warn kernel: Key1Str is Invalid key length(0) or Type(1)
Jan 1 00:05:16 ArcWeb user.warn kernel: Key2Str is Invalid key length(0) or Type(0)
Jan 1 00:05:16 ArcWeb user.warn kernel: Key3Str is Invalid key length(0) or Type(0)
Jan 1 00:05:16 ArcWeb user.warn kernel: Key4Str is Invalid key length(0) or Type(0)
Jan 1 00:05:16 ArcWeb user.warn kernel: 1. Phy Mode = 8
Jan 1 00:05:16 ArcWeb user.warn kernel: 2. Phy Mode = 8
Jan 1 00:05:17 ArcWeb user.warn kernel: (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
Jan 1 00:05:17 ArcWeb user.warn kernel: (Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
Jan 1 00:05:17 ArcWeb user.warn kernel: 3. Phy Mode = 8
Jan 1 00:05:17 ArcWeb user.warn kernel: RTMPSetPhyMode: channel is out of range, use first channel=36
Jan 1 00:05:17 ArcWeb user.warn kernel: MCS Set = ff ff 00 00 00
Jan 1 00:05:17 ArcWeb user.warn kernel: <==== rt28xx_init, Status=0
Jan 1 00:05:17 ArcWeb user.warn kernel: 0x1300 = 00064300
Jan 1 00:05:18 ArcWeb user.warn kernel: (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
Jan 1 00:05:18 ArcWeb user.warn kernel: (Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
Jan 1 00:05:18 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7af8!
Jan 1 00:05:18 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7b24!
Jan 1 00:05:18 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7b50!
Jan 1 00:05:18 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7acc!
Jan 1 00:05:18 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7a48!
Jan 1 00:05:18 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13d7a74!
Jan 1 00:05:18 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a248c!
Jan 1 00:05:18 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13919ac!
Jan 1 00:05:18 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13919e0!
Jan 1 00:05:18 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a2524!
Jan 1 00:05:18 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a2434!
Jan 1 00:05:18 ArcWeb user.warn kernel: RTMP_TimerListAdd: add timer obj c13a24f4!
Jan 1 00:05:18 ArcWeb user.warn kernel: -->RTUSBVenderReset
Jan 1 00:05:18 ArcWeb user.warn kernel: <--RTUSBVenderReset
Jan 1 00:05:19 ArcWeb user.warn kernel: Key1Str is Invalid key length(0) or Type(1)
Jan 1 00:05:19 ArcWeb user.warn kernel: Key2Str is Invalid key length(0) or Type(0)
Jan 1 00:05:19 ArcWeb user.warn kernel: Key3Str is Invalid key length(0) or Type(0)
Jan 1 00:05:19 ArcWeb user.warn kernel: Key4Str is Invalid key length(0) or Type(0)
Jan 1 00:05:19 ArcWeb user.warn kernel: 1. Phy Mode = 8
Jan 1 00:05:19 ArcWeb user.warn kernel: 2. Phy Mode = 8
Jan 1 00:05:19 ArcWeb user.warn kernel: (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
Jan 1 00:05:19 ArcWeb user.warn kernel: (Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
Jan 1 00:05:19 ArcWeb user.warn kernel: 3. Phy Mode = 8
Jan 1 00:05:19 ArcWeb user.warn kernel: RTMPSetPhyMode: channel is out of range, use first channel=36
Jan 1 00:05:19 ArcWeb user.warn kernel: MCS Set = ff ff 00 00 00
Jan 1 00:05:19 ArcWeb user.warn kernel: <==== rt28xx_init, Status=0
Jan 1 00:05:19 ArcWeb user.warn kernel: 0x1300 = 00064300
Jan 1 00:05:19 ArcWeb user.notice root: [Chilli] Stopping Chillispot.
Jan 1 00:05:19 ArcWeb user.notice root: [Chilli] Chillispot not enabled, skipping.
Jan 1 00:05:21 ArcWeb user.notice upnp firewall: removing wan interface

------------- ARC-OS DMESG OUTPUT -------------

[ARC] FillChList: Adding channel=120
[ARC] FillChList: Adding channel=121
[ARC] FillChList: Adding channel=122
[ARC] FillChList: Adding channel=123
[ARC] FillChList: Adding channel=124
[ARC] FillChList: Adding channel=125
[ARC] FillChList: Adding channel=126
[ARC] FillChList: Adding channel=127
[ARC] FillChList: Adding channel=128
[ARC] FillChList: Adding channel=129
[ARC] FillChList: Adding channel=130
[ARC] FillChList: Adding channel=131
[ARC] FillChList: Adding channel=132
[ARC] FillChList: Adding channel=133
[ARC] FillChList: Adding channel=134
[ARC] FillChList: Adding channel=135
[ARC] FillChList: Adding channel=136
[ARC] FillChList: Adding channel=137
[ARC] FillChList: Adding channel=138
[ARC] FillChList: Adding channel=139
[ARC] FillChList: Adding channel=140
[ARC] FillChList: Adding channel=141
[ARC] FillChList: Adding channel=142
[ARC] FillChList: Adding channel=143
[ARC] FillChList: Adding channel=149
[ARC] FillChList: Adding channel=150
[ARC] FillChList: Adding channel=151
[ARC] FillChList: Adding channel=152
[ARC] FillChList: Adding channel=153
[ARC] FillChList: Adding channel=154
[ARC] FillChList: Adding channel=155
[ARC] FillChList: Adding channel=156
[ARC] FillChList: Adding channel=157
[ARC] FillChList: Adding channel=158
[ARC] FillChList: Adding channel=159
[ARC] FillChList: Adding channel=160
[ARC] FillChList: Adding channel=161
[ARC] FillChList: Adding channel=162
[ARC] FillChList: Adding channel=163
[ARC] FillChList: Adding channel=164
[ARC] FillChList: Adding channel=165
[ARC] FillChList: Adding channel=166
[ARC] FillChList: Adding channel=167
[ARC] FillChList: Adding channel=168
RTMPSetPhyMode: channel is out of range, use first channel=36
usb 1-1.3: ifconfig timed out on ep0in len=4/4
MCS Set = ff ff 00 00 00
== rt28xx_init, Status=0
0x1300 = 00064300
br-lan: port 3(ra0) entering disabled state
RX DESC a0a54000 size = 2048
RTMPAllocTxRxRingMemory, Status=0
RTMP_TimerListAdd: add timer obj c11f7b78!
RTMP_TimerListAdd: add timer obj c11c6358!
RTMP_TimerListAdd: add timer obj c11c6330!
RTMP_TimerListAdd: add timer obj c11c6308!
RTMP_TimerListAdd: add timer obj c11ce90c!
RTMP_TimerListAdd: add timer obj c11cea10!
RTMP_TimerListAdd: add timer obj c11ce934!
RTMP_TimerListAdd: add timer obj c119cc2c!
RTMP_TimerListAdd: add timer obj c118e520!
RTMP_TimerListAdd: add timer obj c118f358!
RTMP_TimerListAdd: add timer obj c1190190!
RTMP_TimerListAdd: add timer obj c1190fc8!
RTMP_TimerListAdd: add timer obj c1191e00!
RTMP_TimerListAdd: add timer obj c1192c38!
RTMP_TimerListAdd: add timer obj c1193a70!
RTMP_TimerListAdd: add timer obj c119c948!
default ApCliAPSDCapable[0]=1
1. Phy Mode = 9
2. Phy Mode = 9
3. Phy Mode = 9
RTMP_TimerListAdd: add timer obj c118e12c!
MCS Set = ff 00 00 00 00
SYNC - BBP R4 to 20MHz.l
Main bssid = a8:87:ed:33:6b:38
== rt28xx_init, Status=0
0x1300 = 00064320
br-lan: port 3(ra0) entering learning state
br-lan: topology change detected, propagating
br-lan: port 3(ra0) entering forwarding state
device ra0 left promiscuous mode
br-lan: port 3(ra0) entering disabled state
device ra0 entered promiscuous mode
br-lan: port 3(ra0) entering learning state
br-lan: topology change detected, propagating
br-lan: port 3(ra0) entering forwarding state
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
(Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
RTMP_TimerListAdd: add timer obj c13d7af8!
RTMP_TimerListAdd: add timer obj c13d7b24!
RTMP_TimerListAdd: add timer obj c13d7b50!
RTMP_TimerListAdd: add timer obj c13d7acc!
RTMP_TimerListAdd: add timer obj c13d7a48!
RTMP_TimerListAdd: add timer obj c13d7a74!
RTMP_TimerListAdd: add timer obj c13a248c!
RTMP_TimerListAdd: add timer obj c13919ac!
RTMP_TimerListAdd: add timer obj c13919e0!
RTMP_TimerListAdd: add timer obj c13a2524!
RTMP_TimerListAdd: add timer obj c13a2434!
RTMP_TimerListAdd: add timer obj c13a24f4!
-->RTUSBVenderReset
RTUSBVenderReset
Key1Str is Invalid key length(0) or Type(1)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 8
2. Phy Mode = 8
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
(Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
3. Phy Mode = 8
RTMPSetPhyMode: channel is out of range, use first channel=36
MCS Set = ff ff 00 00 00
== rt28xx_init, Status=0
0x1300 = 00064300
usb 1-1.3: RtmpMlmeTask timed out on ep0out len=0/0
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
(Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
RTMP_TimerListAdd: add timer obj c13d7af8!
RTMP_TimerListAdd: add timer obj c13d7b24!
RTMP_TimerListAdd: add timer obj c13d7b50!
RTMP_TimerListAdd: add timer obj c13d7acc!
RTMP_TimerListAdd: add timer obj c13d7a48!
RTMP_TimerListAdd: add timer obj c13d7a74!
RTMP_TimerListAdd: add timer obj c13a248c!
RTMP_TimerListAdd: add timer obj c13919ac!
RTMP_TimerListAdd: add timer obj c13919e0!
RTMP_TimerListAdd: add timer obj c13a2524!
RTMP_TimerListAdd: add timer obj c13a2434!
RTMP_TimerListAdd: add timer obj c13a24f4!
-->RTUSBVenderReset
RTUSBVenderReset
Key1Str is Invalid key length(0) or Type(1)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 8
2. Phy Mode = 8
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
(Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
3. Phy Mode = 8
RTMPSetPhyMode: channel is out of range, use first channel=36
MCS Set = ff ff 00 00 00
== rt28xx_init, Status=0
0x1300 = 00064300
usb 1-1.3: RtmpMlmeTask timed out on ep0in len=4/4
br-lan: port 3(ra0) entering disabled state
br-lan: port 2(eth0.2) entering disabled state
br-lan: port 1(eth0.1) entering disabled state
eth0.1: del 01:00:5e:00:00:01 mcast address from vlan interface
eth0.1: del 01:00:5e:00:00:01 mcast address from master interface
eth0.2: del 01:00:5e:00:00:01 mcast address from vlan interface
eth0.2: del 01:00:5e:00:00:01 mcast address from master interface
device ra0 left promiscuous mode
br-lan: port 3(ra0) entering disabled state
device eth0.2 left promiscuous mode
br-lan: port 2(eth0.2) entering disabled state
device eth0.1 left promiscuous mode
br-lan: port 1(eth0.1) entering disabled state
usb 1-1.3: RtmpMlmeTask timed out on ep0out len=0/0
eth0.1: dev_set_promiscuity(master, -1)
eth0.1: add 01:00:5e:00:00:01 mcast address to master interface

eth0 mii.o query= phy_id:1, address:4 retval:5e1

eth0 mii.o query= phy_id:1, address:0 retval:3100

eth0 mii.o query= phy_id:1, address:5 retval:0
eth0.1: dev_set_promiscuity(master, 1)
device eth0.1 entered promiscuous mode
br-lan: port 1(eth0.1) entering learning state
br-lan: topology change detected, propagating
br-lan: port 1(eth0.1) entering forwarding state
eth0.2: dev_set_promiscuity(master, -1)
eth0.2: add 01:00:5e:00:00:01 mcast address to master interface

eth0 mii.o query= phy_id:1, address:4 retval:5e1

eth0 mii.o query= phy_id:1, address:0 retval:3100

eth0 mii.o query= phy_id:1, address:5 retval:0
eth0.2: dev_set_promiscuity(master, 1)
device eth0.2 entered promiscuous mode
br-lan: port 2(eth0.2) entering learning state
br-lan: topology change detected, propagating
br-lan: port 2(eth0.2) entering forwarding state
device ra0 entered promiscuous mode
br-lan: port 3(ra0) entering learning state
br-lan: topology change detected, propagating
br-lan: port 3(ra0) entering forwarding state
br-lan: port 3(ra0) entering disabled state
br-lan: port 2(eth0.2) entering disabled state
br-lan: port 1(eth0.1) entering disabled state
br-lan: port 3(ra0) entering learning state
br-lan: port 2(eth0.2) entering learning state
br-lan: port 1(eth0.1) entering learning state
br-lan: topology change detected, propagating
br-lan: port 3(ra0) entering forwarding state
br-lan: topology change detected, propagating
br-lan: port 2(eth0.2) entering forwarding state
br-lan: topology change detected, propagating
br-lan: port 1(eth0.1) entering forwarding state
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
(Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
RTMP_TimerListAdd: add timer obj c13d7af8!
RTMP_TimerListAdd: add timer obj c13d7b24!
RTMP_TimerListAdd: add timer obj c13d7b50!
RTMP_TimerListAdd: add timer obj c13d7acc!
RTMP_TimerListAdd: add timer obj c13d7a48!
RTMP_TimerListAdd: add timer obj c13d7a74!
RTMP_TimerListAdd: add timer obj c13a248c!
RTMP_TimerListAdd: add timer obj c13919ac!
RTMP_TimerListAdd: add timer obj c13919e0!
RTMP_TimerListAdd: add timer obj c13a2524!
RTMP_TimerListAdd: add timer obj c13a2434!
RTMP_TimerListAdd: add timer obj c13a24f4!
-->RTUSBVenderReset
RTUSBVenderReset
Key1Str is Invalid key length(0) or Type(1)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 8
2. Phy Mode = 8
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
(Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
3. Phy Mode = 8
RTMPSetPhyMode: channel is out of range, use first channel=36
MCS Set = ff ff 00 00 00
== rt28xx_init, Status=0
0x1300 = 00064300
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
(Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
RTMP_TimerListAdd: add timer obj c13d7af8!
RTMP_TimerListAdd: add timer obj c13d7b24!
RTMP_TimerListAdd: add timer obj c13d7b50!
RTMP_TimerListAdd: add timer obj c13d7acc!
RTMP_TimerListAdd: add timer obj c13d7a48!
RTMP_TimerListAdd: add timer obj c13d7a74!
RTMP_TimerListAdd: add timer obj c13a248c!
RTMP_TimerListAdd: add timer obj c13919ac!
RTMP_TimerListAdd: add timer obj c13919e0!
RTMP_TimerListAdd: add timer obj c13a2524!
RTMP_TimerListAdd: add timer obj c13a2434!
RTMP_TimerListAdd: add timer obj c13a24f4!
-->RTUSBVenderReset
RTUSBVenderReset
Key1Str is Invalid key length(0) or Type(1)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 8
2. Phy Mode = 8
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
(Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
3. Phy Mode = 8
RTMPSetPhyMode: channel is out of range, use first channel=36
MCS Set = ff ff 00 00 00
== rt28xx_init, Status=0
0x1300 = 00064300
br-lan: port 3(ra0) entering disabled state
RX DESC a138a000 size = 2048
RTMPAllocTxRxRingMemory, Status=0
RTMP_TimerListAdd: add timer obj c11f7b78!
RTMP_TimerListAdd: add timer obj c11c6358!
RTMP_TimerListAdd: add timer obj c11c6330!
RTMP_TimerListAdd: add timer obj c11c6308!
RTMP_TimerListAdd: add timer obj c11ce90c!
RTMP_TimerListAdd: add timer obj c11cea10!
RTMP_TimerListAdd: add timer obj c11ce934!
RTMP_TimerListAdd: add timer obj c119cc2c!
RTMP_TimerListAdd: add timer obj c118e520!
RTMP_TimerListAdd: add timer obj c118f358!
RTMP_TimerListAdd: add timer obj c1190190!
RTMP_TimerListAdd: add timer obj c1190fc8!
RTMP_TimerListAdd: add timer obj c1191e00!
RTMP_TimerListAdd: add timer obj c1192c38!
RTMP_TimerListAdd: add timer obj c1193a70!
RTMP_TimerListAdd: add timer obj c119c948!
default ApCliAPSDCapable[0]=1
1. Phy Mode = 9
2. Phy Mode = 9
3. Phy Mode = 9
RTMP_TimerListAdd: add timer obj c118e12c!
MCS Set = ff 00 00 00 00
SYNC - BBP R4 to 20MHz.l
Main bssid = a8:87:ed:33:6b:38
== rt28xx_init, Status=0
0x1300 = 00064320
br-lan: port 3(ra0) entering learning state
br-lan: topology change detected, propagating
br-lan: port 3(ra0) entering forwarding state
device ra0 left promiscuous mode
br-lan: port 3(ra0) entering disabled state
device ra0 entered promiscuous mode
br-lan: port 3(ra0) entering learning state
br-lan: topology change detected, propagating
br-lan: port 3(ra0) entering forwarding state
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
(Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
usb 1-1.3: ifconfig timed out on ep0out len=0/0
RTMP_TimerListAdd: add timer obj c13d7af8!
RTMP_TimerListAdd: add timer obj c13d7b24!
RTMP_TimerListAdd: add timer obj c13d7b50!
RTMP_TimerListAdd: add timer obj c13d7acc!
RTMP_TimerListAdd: add timer obj c13d7a48!
RTMP_TimerListAdd: add timer obj c13d7a74!
RTMP_TimerListAdd: add timer obj c13a248c!
RTMP_TimerListAdd: add timer obj c13919ac!
RTMP_TimerListAdd: add timer obj c13919e0!
RTMP_TimerListAdd: add timer obj c13a2524!
RTMP_TimerListAdd: add timer obj c13a2434!
RTMP_TimerListAdd: add timer obj c13a24f4!
-->RTUSBVenderReset
RTUSBVenderReset
Key1Str is Invalid key length(0) or Type(1)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 8
2. Phy Mode = 8
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
(Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
3. Phy Mode = 8
RTMPSetPhyMode: channel is out of range, use first channel=36
MCS Set = ff ff 00 00 00
== rt28xx_init, Status=0
0x1300 = 00064300
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
(Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
RTMP_TimerListAdd: add timer obj c13d7af8!
RTMP_TimerListAdd: add timer obj c13d7b24!
RTMP_TimerListAdd: add timer obj c13d7b50!
RTMP_TimerListAdd: add timer obj c13d7acc!
RTMP_TimerListAdd: add timer obj c13d7a48!
RTMP_TimerListAdd: add timer obj c13d7a74!
RTMP_TimerListAdd: add timer obj c13a248c!
RTMP_TimerListAdd: add timer obj c13919ac!
RTMP_TimerListAdd: add timer obj c13919e0!
RTMP_TimerListAdd: add timer obj c13a2524!
RTMP_TimerListAdd: add timer obj c13a2434!
RTMP_TimerListAdd: add timer obj c13a24f4!
-->RTUSBVenderReset
RTUSBVenderReset
Key1Str is Invalid key length(0) or Type(1)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 8
2. Phy Mode = 8
(Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
(Reassign Efuse for 3x7x/3x9x/53xx) Size=0x3c [3c0-3fb]
3. Phy Mode = 8
RTMPSetPhyMode: channel is out of range, use first channel=36
MCS Set = ff ff 00 00 00
== rt28xx_init, Status=0
0x1300 = 00064300

[свернуть]